Hubs and Wheel Maintenance

The following services are available to renovate motorcycle wheel hubs and brake plates:-

Please note after we rebuild a wheel, we would recommend that the hub is skimmed as the hubs can distort when laced up. It makes sense to have your brakes working at maximum efficiency to cope with modern traffic conditions. The brake shoes can be relined and then machined to suit the newly skimmed hub to give you the maximum braking efficiency.

Conical hub repair

SRM have developed the Conical rear hub bearing housing repair. The most common problem is the worn bearing housing, these rear hubs are almost impossible to find nowadays.

We bore out the old worn housing, and insert a CNC machined sleeve complete with bearing retainer ring thread, bringing the centre back to NEW condition.

We are able to modify the hub to take two bearings side by side on the brake side.

QD hub spline repair

Have a worn rear hub spline? Rivets loose? We have made the three different types of rear hub inner sleeves with the splines to Suit A7 A10 B31 B33 A50 A65. The sleeve is available on its own, or you can send in your old hub for reconditioning, we strip hub, clean the hub halves, reassemble with new inner sleeve and rivets and stove enamel the complete hub - so the hub is as new again!

To arrange collection and delivery of everything from your wheels to your whole bike using carefully selected specialist courier services, click here to arrange a collection.

Arrange a collection